Free Shipping on Orders Over
Orders are processed on business days only [ Monday to Friday] .
Our phone lines are temporarily unavailable. Please Email for any order issues : [email protected]
If you already own a Geek Bar Pulse X Vape, the Geek Bar Pulse X2 Device is the upgrade everyone’s been asking Geek Bar for. Same 18mL tank, same dual-mesh coil family, but a bigger 1000mAh battery, a doubled puff count, and a redesigned 3D curved screen with a new Galaxy Cascade UI.
This guide breaks down exactly what changed between the two devices, spec by spec, so you know whether the upgrade is worth it before you buy — plus the full flavor lineup, how to use it, how long it actually lasts, and where to find it.
📋 TABLE OF CONTENTS
The Geek Bar Pulse X2 is a rechargeable disposable vape and the direct successor to the original Pulse X. It keeps the same 18mL e-liquid tank and dual-mesh coil concept, but everything around it got a serious upgrade — bigger battery, more puffs, and a completely reworked chipset.
Where the original Pulse X topped out at 25,000 puffs in Regular Mode and 15,000 in Pulse Mode, the X2 doubles the Regular Mode ceiling to 50,000 puffs while pushing Pulse Mode up to 25,000. That jump comes from a new VPU (Vaporization Processing Unit) chip that Geek Bar says improves e-liquid retention efficiency by roughly 38%, meaning less juice gets wasted in the wick and more of it actually turns into vapor.
The battery grew too — from 820mAh in the original Pulse X to 1000mAh in the X2 — and USB-C charging now gets you to about 80% in roughly 20 minutes, which is noticeably faster than before. On the outside, the biggest giveaway is the screen: a redesigned 3D curved display running a new “Galaxy Cascade” UI animation, with integrated Binary Halo Light strips framing the top and bottom edges.
In short, the X2 is what happens when Geek Bar takes a device people already liked and rebuilds the internals without changing the formula that worked.
A few numbers help put the upgrade in context. Disposable vapes sold in the U.S. are regulated as tobacco products under the FDA’s Deeming Rule, which is part of why every listing — including the X2 — carries a minimum purchase age of 21 and nicotine warning labeling regardless of the retailer. That regulatory baseline hasn’t changed between the Pulse X and Pulse X2; what’s changed is purely on the hardware side.
On the hardware side, the jump from an 820mAh to a 1000mAh battery is roughly a 22% capacity increase, while the puff count effectively doubled — which tells you the battery alone isn’t what’s driving the higher rating. That’s the VPU chip and coil efficiency doing most of the work, not just a bigger power source.
Here’s the full side-by-side spec sheet so you can see exactly what changed:
| Spec | Geek Bar Pulse X2 | Geek Bar Pulse X |
|---|---|---|
| Puff Count | Regular: 50K | Pulse: 25K | Regular: 25K | Pulse: 15K |
| Battery Capacity | 1000mAh | 820mAh |
| E-liquid Capacity | 18.0 mL | 18.0 mL |
| Heating Element | 0.6Ω Dual-Mesh Coil + VPU Chip | Dual-Mesh Coils |
| Display Screen | 3D Curved Screen, Galaxy Cascade UI | 3D Curved LED Screen |
| Charging | USB-C, ~80% in 20 minutes | USB-C rechargeable |
| Airflow Control | AI Power Adjustment | AI Power Adjustment |
The tank size didn’t change, which is the interesting part. Geek Bar got 50,000 puffs out of the same 18mL by making the chip smarter, not by adding more juice.
A lot of e-liquid in a standard disposable never actually gets vaporized — it sits in the wick and goes to waste when the device is thrown out. The X2’s VPU chip manages coil heating more precisely, which Geek Bar says cuts that waste significantly and lets the same 18mL stretch across roughly double the puffs.
1000mAh sounds like a modest bump from 820mAh, but the real benefit is consistency. A larger battery paired with the VPU chip keeps power delivery stable across tens of thousands of puffs, so vapor production shouldn’t taper off as hard near the end of the device’s life the way it can on smaller-battery disposables.
Beyond the spec sheet, four changes define the jump from Pulse X to Pulse X2: puff count, battery size, charging speed, and the screen. Here’s what each one means in daily use.
The Pulse X2 lineup leans into bold, candy-forward profiles alongside a few classic fruit blends carried over from the Pulse X family. Here’s a look at some of the flavors in rotation:
A layered berry blend that mixes pink fruits like strawberry and raspberry with blue fruits like blueberry and blackberry for a candy-like, mixed-berry finish.
An icy, slushie-style cherry profile — sweet and tart up front with a cooling finish that keeps it from feeling one-note.
A clean, cool mint built for an all-day vape — less sweet than the fruit flavors and closer to a classic menthol-style profile.
If you’re comparing flavor lineups across the family, the original Geek Bar Pulse X Vape lineup includes fruit-forward options like Orange Fcuking Fab and Lime Berry Orange, both of which lean tangier and less dessert-style than most of the X2’s launch flavors.
Flavor performance across the X2 lineup should stay consistent from the first puff to the last, since every flavor runs on the same 0.6Ω dual-mesh coil and VPU chip combination. That’s a deliberate design choice — Geek Bar’s stated goal with the VPU chip was to stop flavor from “drifting” as e-liquid runs low, a common complaint with older single-coil disposables where the last third of the tank tastes noticeably weaker than the first.
The X2 is draw-activated, just like the original Pulse X — no buttons required for normal use. Here’s the basic flow:
If you’re new to the Pulse platform in general, our full Geek Bar Guide covers setup, mode switching, and troubleshooting for the whole lineup in more detail.
Puff ratings are lab-tested estimates, not day-by-day guarantees — real-world lifespan depends on draw length, draw frequency, and which mode you favor.
As a rough guide, someone averaging 200–300 puffs a day could stretch the X2’s 50,000-puff Regular Mode rating across roughly 24–30 weeks, nearly double what the original Pulse X’s 25,000-puff rating would offer at the same pace. Pulse Mode’s 25,000-puff rating, at that same daily average, lands closer to 12–15 weeks.
Those numbers shift depending on how often you switch modes and how the coil performs as e-liquid runs low — treat the puff count as a ceiling under ideal conditions, not a fixed promise.
For most current Pulse X owners, the X2 is worth the switch — mainly because of the doubled puff count and faster charging, without any real trade-off in size or e-liquid capacity.
What stands out about the upgrade:
Where it’s worth tempering expectations:
If you’re deciding between the two from scratch rather than upgrading, it’s also worth reading up on What Are Geek Bars generally, since both devices share the same core disposable format — the X2 just does more with it.
Geek Bar Pulse X2 pricing varies by retailer, region, and any promotions running at the time of purchase. Because it sits in the higher-capacity tier — 1000mAh battery, VPU chip, 50,000-puff rating, and a redesigned display — it tends to price a step above smaller, single-coil disposables and roughly in line with, or slightly above, the original Pulse X depending on the store.
It’s also worth knowing that many U.S. states apply their own excise taxes on vapor products, which can shift the final shelf price even for the exact same device from one state to the next. Checking a couple of retailers rather than buying from the first listing you find is usually worth the extra few minutes, especially with a newer release like the X2 where pricing hasn’t fully settled yet.
The Geek Bar Pulse X2 is sold through vape shops, smoke shops, and online retailers, but stock and flavor availability vary by region — not every store selling Pulse devices will have the X2 in yet since it’s a newer release.
The most reliable way to confirm a store near you actually carries it is through our Geek Bar Near Me locator, which points you to retailers currently stocking the device instead of guessing from a general search. You can also browse the full Geek Bar Device lineup to compare the X2 against other current models before you buy.
1. What’s the main difference between the Geek Bar Pulse X2 and the Pulse X?
The X2 roughly doubles the puff count (50,000 vs 25,000 in Regular Mode), uses a larger 1000mAh battery instead of 820mAh, charges faster, and has a redesigned 3D curved screen — while keeping the same 18mL tank size.
2. How many puffs does the Geek Bar Pulse X2 have?
Up to 50,000 puffs in Regular Mode and up to 25,000 in Pulse Mode, from the same 18mL e-liquid capacity as the original Pulse X.
3. Is the Geek Bar Pulse X2 rechargeable?
Yes. It uses a 1000mAh battery that charges via USB-C to about 80% in roughly 20 minutes, faster than the original Pulse X.
4. Is it worth upgrading from the Pulse X to the Pulse X2?
For most vapers, yes — the doubled puff count and faster charging come with no real trade-off in size or tank capacity, though it’s a “nice to have” rather than a necessity if you’re already satisfied with the original.
5. Who is legally allowed to buy the Geek Bar Pulse X2?
In the U.S., federal law sets the minimum purchase age for vapor products, including the Pulse X2, at 21, and many states and retailers apply additional ID checks on top of that.
Geek Bar Pulse — Disposable Vape
🛒 Where to Buy Online
Choose from our verified partner stores — all carry 100% authentic Geek Bar Pulse products sourced directly from official US distributors.
VBTwelve Tribes
Wide Selection • Best Prices
RRRaven Route
Fast Delivery • All Flavors
ZZZippyzz
Quick Shipping • Great Deals
🔒 All partner stores are verified, age-gated, and ship only to legal US states. Purchases are made directly with the retailer — not geekbarpulse.com.
⚠️ Must be 21+ to purchase.